|
Site Updated |
Many of the pages in our site
will require
2964 164th Ave. SE,
Harwood, ND 58042
Toll Free: 800-478-7801
Fax: 701-282-0099
Outside US: 701-282-9194
All rights reserved.
 |
|
 |
|
Model I-180TS
- Positive push off ejection
- Selective spreading depth control
- 2 spool hydraulics provide complete, positive control of cutting, carrying, ejecting and recycling. No waiting for front gate to open or close.
- Single cylinder operation of rear pushgate for trouble free operation
- Heavy duty cutting edges as standard equipment provide maximum impact strength and greater wear resistance
- Protruding center cutting edge as standard equipment for maximum heaped loads and operation in frost
- Rear push beam as standard equipment should pushing be desired
- All operations in full view of the operator
- 18 cu. yd. SAE Heaped Rating
- 14.2 cu. yd. SAE Struck Rating
- 126" Width of Cut
- 23,000 lbs.
- 28 ft. Length
- 11'11" Transport Width
- Super High Capacity 14 Bolt Hubs
- 5 Piece Split Rim with Gussets
- 5" x 20" Trunnion Lift Cylinder
- 5" x 60" Ejection Cylinder
- 54" Front Apron Clearance
- 3-way Adjustable Swivel Hitch, 1.5" hitch pin
- 18" Ground Clearance
- Dual plated 1" floor
- Reversible Caterpillar Blades
- 29.5" x 25" - 28 ply Earthmover Grade Tires
- Common sized bearings, races and Seal Kits
- Available in front and rear configurations
Model I-130
Model I-900
- 10.2 cu. yd. SAE struck Rating
- 97.5" Width of Cut
- 8" Depth of Cut
- Spread Depth 0-14"
- 13,500 lbs.
- 27 ft. Length
- 9'3" Transport Width
- High Capacity 10 Bolt Hubs
- 5" x 16" Trunion Lift Cylinder
- 4.5" x 54" Ejection Cylinder
- 56" Front Apron Clearance
- 3-way Adjustable Yoke Hitch
- 10.5" Ground Clearance
- Dual plated 1" floor
- 20.5" x 25" - 12 ply OTR Tires
- Common sized bearings, races and Seal Kits
- 9 cu. yd. SAE Heaped Rating
- 7 cu. yd. SAE Struck Rating
- 85.5" Width of Cut
- 8" Depth of Cut
- 0-11" Depth of Spread
- 52" Apron Clearance
- 9.5" Ground Clearance
- 5'5" Overall height, raised
- Pushgate Cylinder (1) 4" x 50"
- Front Gate Cylinders (2) 3.5" x 13"
- Lift Cylinders (2) 4" x 16"
- 16.5 x 16.1 - 10 ply Tires
- 8'3" Width
- 7,320 lbs.
Model I-110TS
I-155TS Direct Mount 15.5 yard
- 8.2 cu. yd. SAE struck Rating
- 97.5" Width of Cut
- 8" Depth of Cut
- Spread Depth 0-14"
- 13,000 lbs.
- 27 ft. Length
- 9'3" Transport Width
- High Capacity 10 Bolt Hubs
- 5" x 16" Trunion Lift Cylinder
- 4.5" x 54" Ejection Cylinder
- 56" Front Apron Clearance
- 3-way Adjustable Yoke Hitch
- 10.5" Ground Clearance
- Dual plated 1" floor
- 20.5" x 25" - 12 ply OTR Tires
- Common sized bearings, races and Seal Kits
- 15.5 cu. yd. SAE Heaped Rating
- 11.9 cu. yd. SAE Struck Rating
- 108.5" Width of Cut
- 19,000 lbs.
- 28 ft. Length
- 10 ft. Transport Width
- Super High Capacity 14 Bolt Hubs
- 5 Piece Split Rim with Gussets
- 5" x 20" Trunnion Lift Cylinder
- 5" x 60" Ejection Cylinder
- 63" Front Apron Clearance
- 3-way Adjustable Swivel Hitch, 1.5" hitch pin
- 13" Ground Clearance
- Dual plated 1" floor
- Boron Thru-Hardened Center and Corner Blades
- 29.5" x 25" - 28 ply Earthmover Grade Tires
- Common sized bearings, races and Seal Kits
- Available in front and rear configurations
Moel I-175
Model I-160
- 16.2 cu. yd. SAE Heaped Rating
- 12.7 cu. yd. SAE Struck Rating
- 108.5" Width of Cut
- 10" Depth of Cut
- 0-14.25" Depth of Spread
- 62" Apron Clearance
- 10.5" Ground Clearance
- 6' 2.5" Overall height, raised
- Pushgate Cylinder (2) 4" x 60"
- Front Gate Cylinders (2) 4" x 13"
- Lift Cylinders (2) 5" x 20"
- 20.5 x 25 - 12 ply Rear Tires
- 17.5 x 25 - 12 ply Front Tires
- 9' 11" Width
- 16,940 lbs.
- 17.5 cu. yd. SAE Heaped Rating
- 14.1 cu. yd. SAE Struck Rating
- 108.5" Width of Cut
- 10" Depth of Cut
- 0-14.5" Depth of Spread
- 56" Apron Clearance
- 10.5" Ground Clearance
- 6' 8.5" Overall height, raised
- Pushgate Cylinder (1) 4.5" x 60"
- Front Gate Cylinders (2) 4" x 13"
- Lift Cylinders (2) 5" x 20"
- 20.5 x 25 - 16 ply Rear Tires
- 17.5 x 25 - 12 ply Front Tires
- 9'11" Width
- 17,495 lbs.